MAINTENANCE AND LUBRICATION FOR HIGH SPEED NEEDLE LOOM
1.Advise to use the known brand of lubricating oil 40#;
2.When starting new machine,opening the front cover of machine to add the lubricating oil into oil pump untill its fillter net ;
3:According to the actual amount of oil dripping-back tubing, adjust the pump's handle to control the chain link's running that should bear skating oil;
4:All the moving department of the machines, should be added machine oil one time in two days and be added butter oil one time in two weeks;
5:Advise changing the lucricationg oil after 6~8 months machine working; 

MAINTENANCE AND LUBRICATION FOR COMPUTER JACQUARD LOOM
1.Jacquard head: connecting rod, the upper and lower bracket must be oilled (butter), probably once a month,keep lubrication to prevent copper sleeve and bearing from wear and tear;
2.Mechanical transmission parts: the nose part of all sprocket adapter portion must be oilled with butter, to prevent from wear;
Need to maintain the oil at the proper level;
3.Always check the oil pump to work properly, check if there is oil flow in tubing, to prevent wear and tear off knife
Circuit part: Stick electrical box inside in case of power off of the connectors is loose;
Regularly check if the machine parts have bearing abnormal sound, or if there is iron or rust pin effluent flowing out ;
| Contact Us | Site Map
© 2001- Yitai Technology Co., Ltd